Utah Department of Agriculture and Food

Sampling Procedures and Analysis

Sampling

            DEQ Focus

The DEQ collects samples from waterbodies to determine cyanobacteria or cyanotoxins exposure risks. Initial sampling of cell counts using the ELISA method is commonly conducted through the open water recreation season.

    UDAF Focus

Once elevated cell counts have been identified through testing; or reports of concerns have been received, UDAF will sample for cyanotoxins and provide data related to water used for agricultural purposes. UDAF will focus on livestock watering sources and the distribution of irrigation water.

 

            Procedures

When deciding how to determine sampling procedures, we need to understand the agricultural risks. In a lake, reservoir, or stock pond cattle may have access to the shoreline or the entire water profile if the waterbody is shallow. Rivers, streams, and canals are also often used as livestock drinking water sources.

What are we sampling for? Cyanotoxins

 

Where are we sampling?  When concerns of cyanotoxins have been identified an evaluation will be made to determine sampling locations. Samples should address all possible agricultural impacts including irrigation water, livestock and crops. Knowing possible animal access, additional water inputs, and water distributions are important factors when deciding where samples need to be taken.

  • Lakes, streams and stock ponds based on livestock access
  • Irrigation distribution systems

 

When are we taking samples? Sampling begins once a notice has been verified of potential harm from cyanotoxins. Notifications may come from testing data of high cell counts or reports of animal sickness or loss which may be linked to cyanotoxins.

 

Who will take the samples? UDAF staff including

  1. UDAF Water Quality Staff
  2. Watershed Coordinators
  3. Zone Coordinators and Planners
  4. Conservation District Supervisors
  5. Utah Water Watch

 

What is the protocol for collecting and handling samples?  

  • Handling Samples
    • Fill out sample data label (Attachment H) and correspond with bottle
    • Store on ice

Deliver within 24 hours to a specified lab

 

 

HAB Home