Utah Department of Agriculture and Food

This email address is being protected from spambots. You need JavaScript enabled to view it., Program Manager
(801) 538-7151 Phone
(801) 538-4949 Fax

 

This email address is being protected from spambots. You need JavaScript enabled to view it., Program Manager
(801) 538-7151 Phone
(801) 538-4949 Fax

All bedding and furniture with hidden or enclosed filling, such as:

  • Mattresses, foundations, and futons
  • Baby furniture with enclosed filling - carriages, strollers, car seats, carriers
  • Comforters and quilts
  • Crib bumper pads
  • Cushions
  • Dining room chairs with padded seats, and chairs with enclosed filling in any area
  • Exercise equipment cushions, pads, mats, benches, and seats
  • Filling material in bulk
  • Mattress pads, mats, and cushions
  • Pillows (bed, decorative, etc.)
  • Sleeping bags and cuddle bags
  • Sleeping pads
  • Sofas and loveseats
  • Upholstered dual-purpose furniture
  • Upholstered headboards
  • Upholstered chair
  • Waterbed mattresses with concealed filling materials, padded bed frame

 

Quilted and filled clothing does not require a law label. However, manufacturers of quilted and filled clothing must license their products prior to offering their clothing for sale in Utah. Examples of regulated products include gloves, hats, coats, slippers, ski bibs, and "after-ski booties".

 

This email address is being protected from spambots. You need JavaScript enabled to view it., Program Manager
(801) 538-7151 Phone
(801) 538-4949 Fax

Law Tag for Items Containing Used Materials

Law Tag for Items Containing Used Materials

 

 

 

 

 

 

 

 

 

 

 

 

Exclusive of the portion required to affix the tag to the article, the minimum size of the tag shall not be less than six (6) square inches (2" by 3"), but may be greater as the need demands. This image is NOT the actual size of the law tag, just an illustration of requirements.

All printing in black ink on yellow Tyvek, Valeron, vellum cloth or a material of comparable quality, which shall not flake out when abraded.

In black ink, minimum type size 1/8 " in height.

Insert description of filling materials by clearly imprinting in English, using capital letters not less than 1/8" in height.

Any and all federal requirements and any reference thereto, if placed on a law label, shall be placed at the bottom of the label only and shall be separated from program requirements by a line across the label.

 Attachment of Labels

Law labels shall be securely affixed to a location which is easily visible to the consumer.

Filling Materials Description
Shall be described by the true generic name, grade, description term, or definitions of the filling material as accepted and approved by the state. When more than one kind of filling material is used in a mixture, the percent by weight of each shall be listed in order of their predominance. Federal fiber tolerance standards are applicable.

NOTE: Cannot print on back of label, dual language not allowed. Limit additional information only to what's required by state laws.

This email address is being protected from spambots. You need JavaScript enabled to view it., Program Manager
(801) 538-7151 Phone
(801) 538-4949 Fax

Upholsterer's Law Tag

Exclusive of the portion required to affix the tag to the article, the minimum size of the tag shall not be less than six (6) square inches (2" by 3"), but may be greater as the need demands. This image is NOT the actual size of the law tag, just an illustration of requirements.

All printing in black ink on yellow Tyvek, Valeron, vellum cloth or a material of comparable quality, which shall not flake out when abraded.

In black ink, minimum type size 1/8" in height.

Insert description of filling materials by clearly imprinting in English, using capital letters not less than 1/8" in height.

Any and all federal requirements and any reference thereto, if placed on a law label, shall be placed at the bottom of the label only and shall be separated from program requirements by a line across the label.

Attachment of Labels
Law labels shall be securely affixed to a location which is easily visible to the consumer.

Filling Materials Description
Shall be described by the true generic name, grade, description term, or definitions of the filling material as accepted and approved by the state. When more than one kind of filling material is used in a mixture, the percent by weight of each shall be listed in order of their predominance. Federal fiber tolerance standards are applicable.

NOTE: Cannot print on back of label, dual language not allowed. Limit additional information only to what's required by state laws.

This email address is being protected from spambots. You need JavaScript enabled to view it., Program Manager
(801) 538-7151 Phone
(801) 538-4949 Fax

Basic Law Label

 Exclusive of the portion required to affix the tag to the article, the minimum size of the tag shall not be less than six (6) square inches (2" by 3"), but may be greater as the need demands. This image is NOT the actual size of the law tag, just an illustration of requirements.

All printing in black ink on Tyvek, Valeron, white vellum cloth or a material of comparable quality, which cannot be torn.

In black ink, minimum type size 1/8 " in height.

Insert description of filling materials by clearly imprinting in English, using capital letters not less than 1/8" in height.

Any and all federal requirements and any reference thereto, if placed on a law label, shall be placed at the bottom of the label only and shall be separated from program requirements by a line across the label.

STERILIZATION STATEMENT
If sterilized material is used, the words "Contents Sterilized" must be shown in a minimum of 1/8th inch.

 

NOTE: Cannot print on back of label, dual language not allowed. Please contact the states where product will be sold to ascertain individual state requirements before printing tags.