- Category: Bedding Upholstery & Quilted Clothing
- Published: Monday, 29 July 2013 14:44
- Written by Anne Johnson
- Hits: 27372
(801) 538-7151 Phone
(801) 359-0213 Fax
Exclusive of the portion required to affix the tag to the article, the minimum size of the tag shall not be less than six (6) square inches (2" by 3"), but may be greater as the need demands. This image is NOT the actual size of the law tag, just an illustration of requirements.
All printing in black ink on yellow Tyvek, Valeron, vellum cloth or a material of comparable quality, which shall not flake out when abraded.
In black ink, minimum type size 1/8 " in height.
Insert description of filling materials by clearly imprinting in English, using capital letters not less than 1/8" in height.
Any and all federal requirements and any reference thereto, if placed on a law label, shall be placed at the bottom of the label only and shall be separated from program requirements by a line across the label.
Attachment of Labels
Law labels shall be securely affixed to a location which is easily visible to the consumer.
Filling Materials Description
Shall be described by the true generic name, grade, description term, or definitions of the filling material as accepted and approved by the state. When more than one kind of filling material is used in a mixture, the percent by weight of each shall be listed in order of their predominance. Federal fiber tolerance standards are applicable.
NOTE: Cannot print on back of label, dual language not allowed. Limit additional information only to what's required by state laws.