- Category: Bedding Upholstery & Quilted Clothing
- Published: Monday, 29 July 2013 14:38
- Written by Anne Johnson
- Hits: 25212
(801) 538-7151 Phone
(801) 359-0213 Fax
Exclusive of the portion required to affix the tag to the article, the minimum size of the tag shall not be less than six (6) square inches (2" by 3"), but may be greater as the need demands. This image is NOT the actual size of the law tag, just an illustration of requirements.
All printing in black ink on Tyvek, Valeron, white vellum cloth or a material of comparable quality, which cannot be torn.
In black ink, minimum type size 1/8 " in height.
Insert description of filling materials by clearly imprinting in English, using capital letters not less than 1/8" in height.
Any and all federal requirements and any reference thereto, if placed on a law label, shall be placed at the bottom of the label only and shall be separated from program requirements by a line across the label.
If sterilized material is used, the words "Contents Sterilized" must be shown in a minimum of 1/8th inch.
NOTE: Cannot print on back of label, dual language not allowed. Please contact the states where product will be sold to ascertain individual state requirements before printing tags.